Operator`s manual

701333-004 4-15
Configuring the 1330 in 3270 Mode
307 – Form Feed (FF) Printed with a Space
Use Configuration Option 307 to specify whether the print head will move to the first
character position or second character position on the next top of form (TOF).
noitpO eciohC gninaeM
703
)oN(01retcarahc,FOTtadaehtnirpehtstuP
)seY(1)tluafed(2retcarahc,FOTtadaehtnirpehtstuP
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.
308 – Formatted Print
Configuration Option 308 allows you to select the formatted print override, a feature that
honors certain format commands in spite of a formatted print request from the host CPU.
Carriage Return, End of Message, and New Line commands are active, and null lines are
not suppressed. The host CPU defined line length is honored. To activate the formatted
print override feature, select 1.
noitpO eciohC gninaeM
803
)oN(0egasseMfodnEdna,nruteRegairraC,eniLweN
)tluafed(detnirpsiecapsa–derongiera
)seY(1egasseMfodnEdna,nruteRegairraC,eniLweN
detucexeera
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.
309 – Bar Code Control
Use Configuration Option 309 to configure the bar code printout in 2124 emulation
mode.
noitpO eciohC gninaeM
903
1tnofedocrab4212dradnatsehtsesU–dradnatS
)tluafed(retnirpehtni
2rellamsaottnofsesserpmoC–tnoFdesserpmoC
.elbaliavasi9fo3edocrabylnoyltnerruC.ezis
tonsitnofdesserpmocedocrabtnerrucehtnehW
.ezisdradnatsottluafed,elbaliava
3ehtotresolcebotpuIRHsevoM–IRHresolC
lliwIRH,eulavsihtotderugifnocnehW.edocrab
fi,tnofdesserpmocehtesuyllacitamotua
.tnofdradnatssesu,elbaliavatonfI.elbaliava