Operator`s manual

4-10 701333-004
Configuring the 1330 in 3270 Mode
203 – Mono/Dual Case
Configuration Option 203 enables you to specify whether the 1330 will print in mono
case (all characters uppercase) or dual case (characters uppercase and lowercase) in LU3
mode.
noitpO eciohC gninaeM
302
1esacreppunidetnirperasretcarahclla–esaconoM
2esacreppunitnessadetnirperasretcarahc–esaclauD
)tluafed(esacrewoldna
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (1 or 2) and press Save.
204 – Bold Print Enable
Use Configuration Option 204 to enable or disable bold print. If you specify YES (by
entering 1), bold print will be enabled.
noitpO eciohC gninaeM
402
)oN(0)tluafed(delbasidsitnirpdloB
)seY(1delbanesitnirpdloB
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (0 or 1) and press Save.
205 – Two-Pass Print Direction
Use Configuration Option 205 to better align the two print head passes on printing that
requires two passes. This option could be useful during subtractive color printing.
With Choice 1, the print head will make two unidirectional passes. With Choice 2, the
print head will make one bidirectional pass. Choice 1 will give you truer, crisper colors
on the printout; however, throughput will be reduced, and Choice 2 will give faster
operation.
noitpO eciohC gninaeM
502
1sessaplanoitceridinuowtsekamdaehtnirpehT
2)tluafed(ssaplanoitceridibenosekamdaehtnirpehT
To specify your choice, follow the configuration procedure that begins on Page 4-1.
Enter your choice (1 or 2) and press Save.