Operator`s manual

701333-004 B-37
Programming Notes
id
This byte specifies the printer for which the following device-dependent parameter bytes
are intended. If the ID does not address your printer, the parameter bytes that follow are
ignored. The IDs supported by this printer are 3 (X’03') or 22 (X’16').
parm1/parm2
parm1 and parm2 are currently reserved for future development. They perform no operation
in the printer.
parm2
tiB nO ffO
etybdracsiD7etybsihterongIetybsihtssecorP
morfhctiwS6
ottnofASU
tnoflaugnilitluM
tnoflaugnilitlumesU
tnofASUesU
lanoitceridiB5
)IPC01(QLN
lanoitceridinUlanoitceridiB
)ylnoIPC01(
devreseR4
QLNtceleS3tnofQLNstceleSyekQLN.tnofIIQLNstceleSyekQLN
elbanedeefmroF2tsohmorfdeefmroferongI
mroffopottasiretnirpnehw
deefmrofronoH
htgneleniL1repaphcni-0.8repaphcni-6.31
devreseR0
Miscellaneous Commands
Miscellaneous commands are listed below.
noitcnuF edoC lamiceD xeH
lleBLEB7 70
lecnaCNAC4281
gnitnirPlanoitceridinU1UCSE1058721055B1
teseR0UCSE0058720055B1
*roloCtceleS1mrCSE1m411721m27B1
Miscellaneous Commands