Operator`s manual

701333-004 B-11
Programming Notes
Text Function Set Commands
The Text function set contains the commands and data controls for presenting text
information on a logical page, page segment, or overlay area on a physical page. The
Text function set commands are:
dnammoC edoC noitpircseD
EFLF36DecnelaviuqEtnoFdaoL
ELD16DecnelaviuqEdaoL
TWD26DtxeTetirW
Image Function Set Commands
The Image function set contains the commands and data controls for presenting image
data on a logical page, page segment, or overlay area on a physical page. The Image
function set commands are:
dnammoC edoC noitpircseD
CIWD36DlortnoCegamIetirW
IWD46DegamIetirW
DNED56DdnE
Graphics Function Set Commands
The Graphics function set contains the commands and data controls for presenting graphics
pictures on a logical page, page segment, or overlay area on a physical page. The Graphics
function set commands are:
dnammoC edoC noitpircseD
CIWD36DlortnoCegamIetirW
IWD46DegamIetirW
DNED56DdnE
Graphics is a data type the 1330 uses to present line art drawings in a graphics block area
on a page. A sequence of drawing orders produces arcs, lines, fillets, character strings,
markers, and other elements to define the drawing. These orders, grouped into one or
more segments, present the picture.
The controller sends a Write Graphics Control command to the printer to establish the
control parameters and initial drawing conditions for presenting the picture data. The
picture segments themselves are sent to the printer as data in one or more Write Graphics
commands.