Operator`s manual

5-24 701333-004
Configuring the 1330 in ASCII Mode
506 – Data Bits
Configuration Option 506 selects 7-bit or 8-bit data. This selection must match that of
the host.
noitpO eciohC gninaeM
605
1)tluafed(atadtib-7tceleS
2atadtib-8tceleS
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
507 – Stop Bits
Configuration Option 507 selects one or two stop bits. This selection must match that of
the host.
noitpO eciohC gninaeM
705
1)tluafed(tibpotsenotceleS
2stibpotsowttceleS
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
508 – Modem Control
Configuration Option 508 selects whether the printer will recognize or ignore DCD/
DSR modem control signals.
noitpO eciohC gninaeM
805
0slangislortnocmedomRSD/DCDerongI
1slangislortnocmedomRSD/DCDezingoceR
)tluafed(
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.