Operator`s manual

5-22 701333-004
Configuring the 1330 in ASCII Mode
500 Communication
The following options define the printer’s communication selections.
501 – Printer Emulation Mode
Configuration Option 501 selects the printer emulation.
noitpO eciohC gninaeM
105
1)tluafed(retnirporP
2018-IT
5-3devreseR
To specify your choice, follow the configuration procedure that begins on Page 5-1.
Enter your choice and press the Save key.
For a listing of the commands supported in each emulation, refer to Appendix B of this
manual.
502 – Buffer Size
Configuration Option 502 enables you to select the effective size of the 1330’s input or
communications buffer:
noitpO eciohC gninaeM
205
1)tluafed(reffubK2
2reffubK8
3reffubK61
4)mumixam(reffubK23
To select buffer size, follow the configuration procedure that begins on Page 5-1. Enter
your choice (1, 2, 3, or 4) and press Save.
503 – DC1/DC3 Recognition
Configuration Option 503 enables or disables the printer’s recognition of DC1/DC3
characters. This option enables the host to control the online/offline state of the printer.
noitpO eciohC gninaeM
305
0noitingocerelbasiD
1)tluafed(noitingocerelbanE