Owner's Manual

MTX.COM

GENERAL OPERATION

1. Power - Press & hold to power on. The AWBTSW defaults to BT mode, which is indicated by the

center button constantly backlit BLUE.

2. Mode - Press & hold to switch from BT to AUX input. When in AUX mode the buttons will be

constantly backlit RED. When in BT mode the buttons will be constantly backlit BLUE.

3. Play/Pause - Press once for play/pause.

4. Volume Up - Press to increase volume.

5. Volume Down - Press to decrease volume.

6. Track Forward - Press to play the next track.

7. Track Back - Press to play the previous track.

BLUETOOTH

PAIRING

1. Turn on AWBTSW by pressing the power button, which will be backlit RED momentarily, then

WHITE constantly to indicate that the AWBTSW is ready to use.

2. If not already paired with another learned device, the AWBTSW will automatically enter pairing

mode, which is indicated by the backlight ashing BLUE.

3. From your phone’s Bluetooth

pairing menu nd the AWBTSW and connect to it.

You are now paired to the AWBTSW and will automatically default to this device if in range whenever

the AWBTSW is powered on.

MOUNTING

The AWBTSW is designed to snap into a standard Carling style switch opening, which is commonly

used in the dashboard of many automobiles and off-road vehicles.

WIRING

Red - Connect to +12V for Power

Blue - Connect to amplier remote wire to turn on amp when the AWBTSW is powered ON

Black - Connect to -12V for Ground

Main Output - Connect to amplier input

AUX Input - Connect to an optional auxiliary source other than Bluetooth

1.00" (25.50mm)

1.93" (49.00mm)

2.58" (65.60mm)