Operating instructions

7.20 Drive Systems, Driving End and Free End (Coupling)
7.20.1 Coupling – Condition check
Preconditions
☑ Engine is stopped and starting disabled.
Coupling – Condition check
1. Remove perforated plate(s).
2. Wipe rubber element with dry cloth, do not use organic detergents.
3. Check condition of coupling through assembly hole(s), using a torch. Hair cracks in the rubber elements
are permissible.
4. If a considerable number of deeper cracks or places with broken-off rubber are found, contact Service.
5. Install perforated plate(s).
M015412/03E 2012-02 | Task Description | 177
TIM-ID: 0000007655 - 002