Operating instructions

413 – HIHI U-PDU
ZKP-Number: 2.0141.932
Limit value 2
Cause Corrective action
Injector voltage too high. 1. Check cabling.
2. Check power supply.
3. Contact Service.
414 – HI Water Level Fuel Prefilter
ZKP-Number: 2.0156.931
Limit value 1
Cause Corrective action
Water level in fuel prefilter too
high.
u Drain water (→ Page 129).
415 – LO P-Coolant Intercooler
ZKP-Number: 2.0107.921
Limit value 1
Cause Corrective action
Coolant pressure in intercooler
too low.
u Top up coolant (→ Page 158).
416 – SS P-Coolant Intercooler
ZKP-Number: 2.0107.922
Limit value 2
Cause Corrective action
Coolant pressure in intercooler
too low; engine shutdown.
u Top up coolant (→ Page 158).
417 – SD Water Level Fuel Prefilter
ZKP-Number: 1.8004.594
Cause Corrective action
Water level sensor of fuel
prefilter faulty; short circuit or
wire break.
u Check sensor and cabling, replace as necessary.
Error cleared after restarting the engine.
419 – SD T-Coolant b.Engine
ZKP-Number: 18.004.604
Cause Corrective action
Coolant inlet temperature sensor
faulty, short circuit or wire break.
u Check sensor and cabling (B3), replace as necessary.
MS150093/01E 2012-06 | Troubleshooting | 89
TIM-ID: 0000008506 - 001