Operating instructions

090 – SS Starter Speed Not Reached
ZKP-Number: 2.1090.925
Cause Corrective action
Idling speed was not attained. u Contact Service.
091 – SS Release Speed Not Reached
ZKP-Number: 2.1090.924
Cause Corrective action
Runup speed was not attained. u Contact Service.
092 – SS Starter Speed Not Reached
ZKP-Number: 2.1090.923
Cause Corrective action
Starter speed was not attained;
termination of start sequence;
starter rotates too low or not at
all.
u Contact Service.
093 – SS T-Preheat
ZKP-Number: 2.1090.922
Limit value 2
Cause Corrective action
Preheating temperature too low;
coolant temperature too low for
engine start ; engine start
interlock.
u Check preheater.
094 – LO T-Preheat
ZKP-Number: 2.1090.921
Limit value 1
Cause Corrective action
Preheating temperature too low;
coolant temperature too low for
engine start.
u Check preheater.
095 – AL Prelubrication Fault
ZKP-Number: 2.1090.920
Cause Corrective action
oil priming failure. u Check oil priming system.
MS150093/01E 2012-06 | Troubleshooting | 63
TIM-ID: 0000008506 - 001