Operating instructions

6.6.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Installation/removal tool
F6789889 1
Milling cutter
F30452739 1
Torque wrench, 0.5-5 Nm
0015384230 1
Torque wrench, 10-60 Nm
F30452769 1
Torque wrench, 60-320 Nm
F30452768 1
Assembly paste (Optimoly Paste White T)
40477 1
Grease (Kluthe Hakuform 30-10/Emulgier)
X00029933 1
Engine oil
O-ring
(→ Spare Parts Catalog)
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
Preparatory steps
1. Shut off fuel supply to engine.
2. Remove cylinder head cover (→ Page 117).
Removing injector
1. Disconnect cable connector on injector.
120 | Task Description | MS150093/01E 2012-06
TIM-ID: 0000000925 - 006