Operating instructions

1.7 ATEX precautions (if applicable)
The following additional precautions must be taken to comply with the requirements of the ATEX
explosion protection directives:
• Unoccupied connections for the wiring harness must be sealed with protective caps.
• The entire engine wiring harness must be covered with metal guards to protect it from mechanical im‐
pact and UV radiation.
• Continuous power supply to the engine must be ensured when the engine is in the hazardous zone.
14 | Safety | MS150025/02E 2012-10
TIM-ID: 0000024691 - 001