Operating instructions

Oil filter replacement with the
engine running
A Filter in operation (normal position)
B Filter switched off
Note: When changing filters during engine operation only 1 filter may ever be cut out.
1. Cut out the filter to be replaced: Turn switching lever to position B.
2. Remove oil filter using the filter wrench.
3. Clean the sealing face of the connecting
piece.
4. Check sealing ring of new oil filter and
moisten it with oil.
5. Install and tighten new oil filter by hand.
6. Cut in the cut-out filter: Turn switching lever
to position A.
7. Replace other oil filters in the same way.
8. Check oil level (→ Page 123).
126 | Task Description | MS150025/02E 2012-10
TIM-ID: 0000014211 - 001