User guide

4. In the Properties panel, enter the following:
Go To + DAQ + Detection Activity Properties
ValueProperty
Enter “Apply Program Command”Display Name
Note:
The controls that follow
are in the Go To tab.
Right-click Rate and select Edit to display
the Edit Variable window. In the Edit
Rate
Variable window, change the Default
Value to 3 mm/s.
Enable (check)Termination Condition
1.00 kNValue
Enable (check)Brake Distance
100 NValue
Runtime effect
Modified properties are configured to ramp the crosshead at a rate of 3 mm/s until either:
MTS TestSuite | 91
Modify the Example Test