User guide

Program Command in the Example Test
In the example test, program command is issued from the Go To + DAQ + Detection activity nested within
the second Parallel Paths activity in the Run section. This is the only activity in the example test that
applies forces to the specimen.
Branches in the Parallel Activity
Description of Branches in the Parallel Activity
DescriptionItem
Auto Offset and Go To + DAQ + Detection activities. For more
information, see Path for the typical test flow .
1
State Change Detector activity. For more information, see Path
with the State Change Detector .
2
Limit Detection activity: Specimen. For more information, see
Path with the Limit Detector for the specimen .
3
Limit Detection activity: Load Cell. For more information, see Path
with the Limit Detector for the load cell. .
4
MTS TestSuite | 33
Examine the Example Test