Manual

18. Wipe the platen assembly free of debris. Make sure debris is removed from feedthrough holes and bell
seal screw holes.
Clean the Assembly Platen
Changing Between Extension/Pore Pressure
and Compression Test Setups
This section explains how to change your Triaxial Cell between a setup ready to run pore pressure/extension
tests to one ready to run compression tests.
Changing to a Compression Test Setup tells what you must do to go from an extension or pore pressure
test setup to a compression test setup.
Changing to an Extension/Pore Pressure Test Setup tells what you must do to go from a compression
test setup to an extension or pore pressure test setup.
62 | Triaxial Cell Product Information
Operation