Instruction Manual
Table Of Contents
- Contents
- Technical Support
- Preface
- Hardware Overview
- Software Utilities
- Setting up the Transducer Interface
- Installing the Transducer
- Contents
- Hazard Icon
- Road and Track Vehicles
- Road Simulator
- Analyzing SWIFT Data
- Maintenance
- Troubleshooting
- Assembly Drawings

SWIFT 10 ATV Sensors
60
Download the Calibration File
Setting up the Transducer Interface
Download the Calibration File
Use the program TI2XFER to download the modified calibration file to the TI.
1. Insert the CD or diskette into the laptop computer or PC.
2. Run the program TI2XFER.
3. Enter 2 at the prompt to download the calibration file.
4. Enter the name of the file you wish to download.
5. TI2XFER will prompt you when the file has successfully downloaded.
6. Enter 0 at the prompt to exit the program.
SWIFT Mini TI transfer (Version 1.0)
Upload and download settings
0...Exit
1...Upload settings from TI box
2...Download settings to TI box
Choice? 2
Filename? sample.cal
0...Exit
1...Upload settings from TI box
2...Download settings to TI box
Choice? 0
Program completed