Instruction Manual
Table Of Contents
- Contents
- Technical Support
- Preface
- Hardware Overview
- Software Utilities
- Setting up the Transducer Interface
- Installing the Transducer
- Contents
- Hazard Icon
- Road and Track Vehicles
- Road Simulator
- Analyzing SWIFT Data
- Maintenance
- Troubleshooting
- Assembly Drawings

Specifications
SWIFT 10 ATV Sensors Hardware Overview
27
Output connector type
D-shell or BNC via adapter
Auto shunt calibration
On vehicle or laboratory test rig.
* Contact MTS for other rim sizes. Larger diameter rims can be used, provided that overall clearance from
brake calipers and suspension components is maintained.
† Load impedance >1 k
Ω; 0.01 µF (maximum) load capacitance.
‡ Half axle rated capacity per SAE J328.
§ Moment fatigue-rated for 100,000 cycles.
# Each SWIFT sensor is calibrated on an MTS calibration machine. MTS provides complete documentation
of calibration values for each SWIFT unit
** Measured at the spindle hub.
SWIFT 10 ATV Transducer Performance (part 2 of 2)
P
ARAMETER SPECIFICATION