User guide

Serial I/O Port Cable Connections
LX Laser Extensometer Operation
47
Communications Parameters
The communications parameters of the serial input/output port are:
• 1 Start Bit
• 1 Stop Bit
• 8 Data Bits
• No Parity
• Baud: 9600, 4800, 2400, or 1200
Baud is the only selectable parameter of the serial input/output setup. It is
selected manually from the Setup mode using the control panel keypad.
The Echo is normally set to OFF but it may be turned ON or OFF by a command
given over the Serial I/O Port.