Manual

Series FEC Environmental Chamber Product Manual
36
Temperature Controller Common Functions
Operation
3. Set heating and cooling parameters:
The temperature controller uses dual channels to control the temperature.
Channel 1 is the heating channel; channel 2 is the cooling channel. Relevant
parameters have been set at the factory; do not change the parameters. If
there are some abnormal phenomena, enter the following parameters to help
it return to normal state.
conF -insT -Act = rEu
conF -1A - Func = HEAt
conF -2A - Func = CooL
The following flow chart illustrates the method to set these parameters.
20.0
350.0
ACCS
LISt
codE
0
codE
1
codE
PASS
Goto
FuLL
350.0
20.0
350.0
20.0 td
60
tI
360
30
PbPId
LISt
3UHVV 
WLPHV WLPHV
3UHVV 
3UHVV  WLPHV
ZDLW 
VHFRQGV
3UHVV 
WLPHV
$IWHU )X// IODVKLQJ
SUHVV
WR H[LW
SUHVV
FRQWLQXRXV
SUHVV
WR ILQG 3
SUHVV
WR H[LW
SUHVV
WR ILQG ,
SUHVV
WR ILQG '
Setting PID Parameters