Manual

Operation of Temperature Controller
Series FEC Environmental Chamber Product Manual Operation
31
Operation of Temperature Controller
The temperature controller is located at the rear of the cabinet, which allows you
to connect it with the computer and set parameters via the software easily.
Inspect if cables are connected correctly before turning on power.
Set the test temperature in the allowable temperature range without exceeding the
minimum or maximum temperature.
FUNCTION DESCRIPTION
Alarm light-when the temperature exceeds the
maximum temperature of chamber, the light lights.
Starts the heating or cooling.
Disables (stops) the heating or cooling.
Control switch of the illuminating lamp in the
cabinet.
A switch used for removing frost on the glass
observation window during a low-temperature test.