Instruction Manual

High Pressure Filter Kit
Model 505G2.07/.11 SilentFlo™ HPU
63
Accessories
Contents High Pressure Filter Kit 63
Surge Suppressor Kit 65
Precharging the Surge Suppressor Accumulator 66
Lifting Kit 69
Caster Kit 71
High Pressure Filter Kit
This section describes how to install the high pressure filter kit (part number 100-
008-737).
To install the high pressure filter kit:
1. Ensure that system hydraulic pressure has been reduced to zero before
proceeding. To do this, turn off the hydraulic power unit and exercise the
actuator until it stops moving.
2. Remove the hose assembly connecting the high pressure port on the
manifold assembly to the high pressure output port.