Owner manual

Series 315 Load Frame Installation

Installation

This section describes how to install the Series 315 Load Frame.

Contents Lifting and Moving Instructions 18

Connecting Cables 23

Connecting Hydraulics 24

Prerequisite You will need a fork lift or overhead crane capable of lifting the load

frame. Ensure the lifting equipment can accommodate the weight of the

load frame, see the following table.

Procedure Perform the following to install the load frame.

1. Unpack the load frame. Go to “Lifting and moving” on page 19 to unpack and

move the load frame.

2. Connect the cables between the load frame and controller. Go to “Connecting

Cables” on page 23 to make the various controller connections. Return to this

procedure when done.

3. Connect the hydraulic hoses between the load frame and hydraulic

service manifold. Go to “Connecting Hydraulics” on page 24 to connect the

load frame to your hydraulic supply system. Return to this procedure when

done.

315 Load Frame Weights

Model Weight

315.01 2359 kg (5200 lb)

315.02 3855 kg (8500 lb)

315.03 6350 kg (14,000 lb)

315.04 7590 kg (16,700 lb)