User guide

Load Unit Addendum
82
Addendum
Handset functions The handset is intended to be used in a system for specimen loading or setup. In
some applications, it can be used to completely run a test.
1
2
3
4
5
6
7
15
14
12
11
10
9
8
LINE 1 UP TO 20 CHAR
LINE 2 UP TO 20 CHAR
LINE 3 UP TO 20 CHAR
LINE 4 UP TO 20 CHAR
13
Handset Controls and Indicators
# Control/Indicator Description
1Page
Displays previous or next text in the display.
2Active
Indicator. When lit, indicates the system is active (power
applied).
3 Scroll highlight
Scrolls the highlighted selection down. Selection cycles to the
top when the bottom line is highlighted and the switch is
pressed.
4 Thumb-wheel
Makes fine actuator adjustment (towards display – up; away
from display – down). Only if Handset Enable is active.
5Pause
Pauses the test action. This must be pressed again for the test to
resume. Only if the application test software is active.
6Stop
Stops the test action. Only if the application test software is
active.