Owner manual

Mounting for Angularly Applied Loads
Series 249 Rod Swivel Product Manual Installation
27
Angle of Load Application versus Maximum Load at Slip Point
Systems that require the swivels to react angularly to applied tensile and
compressive loads should also take into account the possibility of backlash
between the retaining stops and the swivel jaw. The retaining stops should be
mounted in a manner that will eliminate or minimize this backlash.
249.12
249
.
20
2
49.
23
2
49
.32
249.
4
1
2
49.42
2
49.
51
(degrees of rotation from the vertical