User Manual

Series 248 Actuator Product Information
26
Static Support Dimensions
Introduction
Static Support Dimensions
Static Support Dimensional Drawing
MODEL*A B C D E F
MM IN MM IN MM IN MM IN MM IN MM IN
248.0X 463.6 16.40 108.0 4.38 241.3 9.50 508.0 20.0 117.8 7.00 444.5 17.50
248.1X 692.2 27.25 134.9 5.31 254.0 10.00 584.2 23.0 195.5 7.50 520.7 20.50
248.2X 997.0 39.25 134.9 5.31 304.8 12.0 640.1 25.5 241.3 9.50 584.2 23.00
* Each model uses an accumulator. The Model 248.0x uses a 5.7 L (1.5 gal) accumulator; the Model
248.1x uses a 11.4 L (3 gal) accumulator; the Model 248.2x uses a 18.9 L (5 gal) accumulator.
A
B
F
E
D
C
(31.8 mm (1.25 in.))
31.8 mm
(1.25 in)
4 holes
26.2 mm (1.03 in)
diameter through