User Manual

Series 248 Actuator Product Information
20
Specifications and Dimensions
Introduction
Specifications and Dimensions
Several types of specifications are listed on the following pages.
Actuator ID
A plate on the actuator (typically located on the front end cap opposite the drain
line) contains the following information:
• Model number
• Serial number
• Force rating
• Area
• Stroke specifications
This information is required when contacting MTS Systems Corporation
regarding the actuator.
Series 248 Actuator Force Ratings
The following table lists the force rating of each actuator model.
M
ODEL
NUMBER
FORCE RATING*PISTON AREA
ROD DIAMETER
†
KNKIP
CM
2
IN
2
MM IN
248.01
10 2.2 5.23 0.81 80.0 3.15
248.02
16 3.5 8.32 1.29 80.0 3.15
248.03
28 6.2 14.52 2.25 80.0 3.15
248.04
38 8.5 20.00 3.10 80.0 3.15
248.05
50 11.0 25.67 3.98 80.0 3.15
248.11
100 22.0 50.77 7.87 100.0 3.94
248.12
160 35.0 81.29 12.60 100.0 3.94
248.21
250 55.0 127.03 19.69 125.0 4.92
*
Nominal force achieved with 21 MPa (3000 psi) hydraulic pressure.
†
The area includes a fully retracted standard length piston rod.