Manual

Sideload Calculation Constants
Cyclic Sideload KRod Diameter GBearing Area EBearing Length DBearing Spacing
A
Model
0.6001.753.501.71005.960
244.11
0.6001.753.501.71005.960
244.12
0.1402.756.261.93805.820
244.21
0.1402.755.841.86305.475
244.22
0.1402.755.981.88805.425
244.23
0.0683.7510.032.13405.825
244.31
0.0265.2522.372.87006.530
244.41
0.0156.0024.692.81257.865
244.51
Note:
The equations included in this procedure assume that the values of F and P are measured in pounds
force and that B, C, and S (stroke) are measured in inches.
1. Determine the magnitude of nonaxial loads F and P and the point of application of these loads (B and C
respectively). These parameters are dependent on the test setup configuration. If any parameter is variable
during the test, use maximum values.
60 Series 244 Actuators Product Information
Operation