Manual

Open LVDT Housing
DescriptionItem
Cushion1
Stroke Length2
A min.3
68.6 mm (2.70 in) +Stroke Length4
Rear End Cap LVDT Mounting5
4 holes, “B” thread size, “C” deep, spaced as shown6
2 holes, “B” thread size, “C” deep, spaced as shown7
Open Housing LVDT Specifications For Extra Piston Length*
Weight
§
DCBA
†,‡
Model
lbkginmminmmUNCinmm
3917.7N/AN/A0.7519.13/8-165.90149.9244.11
4118.6N/AN/A0.7519.13/8-165.90149.9244.12
12255.3N/AN/A1.0025.43/8-16
#
7.07179.6244.21
12657.1N/AN/A1.0025.43/8-16
#
7.07179.6244.20
13360.3N/AN/A1.0025.43/8-16
#
7.07179.6244.22
15168.5N/AN/A1.0025.43/8-16
#
7.07179.6244.23
282127.93.0677.70.6015.23/8-168.85224.8244.31
645292.63.96100.60.6015.23/8-169.25234.9244.41
1135514.83.96100.60.6015.23/8-169.82249.4244.51
1415161718
14
* Specifications not listed in this table can be found in the table called “Dimensions.”
15
This specification applies to a fully retracted standard extra length piston rod.
16
Optional rod lengths are available for crosshead actuator mounting or other special mounting configurations.
17
§ For a 152 mm (6 in) stroke basic load frame/load unit cylinder assembly and open housing LVDT.
18
# Requires 5/8-11 to 3/8-16 insert thread (supplied on open housing LVDT assembly).
Series 244 Actuators Product Information 27
Introduction