Owner manual

5.2.5.0 Adding a Cycle Activity
Use this task to add a Cycle activity to the procedure and define its properties. During the test, the Cycle
activity applies a sinusoidal command relative to the mean level.
1. Drag a Cycle activity below the Ramp activity.
Adding a Cycle Activity
2. Define Cycle activity properties:
a. Ensure that the Cycle activity is selected.
b. Enter the following values as necessary:
Cycle Activity Properties
ValueProperty
Cycle at MeanDisplay Name
FrequencyTiming Type
1 HzFrequency
True SineWave Shape
5Number of Cycles
Interrupt ImmediatelyAdvanced...
Relative End Levels
Multipurpose Elite Test Design Guide 43
5.0 Creating Tests