Owner manual

Specifications
Model 685.53 Grip Control Module Introduction
7
Specifications
The following table lists the hydraulic specifications for the grip control.
Parameter Specification
Maximum Input Pressure 21 MPa (3000 psi)
Pressure Control Range
0.7–21 MPa (± 0.06 MPa) (100–3000 psi (± 10 psi))
Pressure Stability
(at all pressures)
± 0.03 MPa (± 5 psi)
Grip and Pressure Fittings male, JIC 37º flare -6
Drain Fitting male, JIC 37º flare -4