User Manual

Model 512.04 Hydraulic Power Unit Maintenance
25
Adding Hydraulic Fluid
1. The hydraulic power unit (HPU) will shut down when fluid drops
below the sight glass. Normally, it should be close to the top of the
sight glass.
Check the Fluid Level
Do not mix different brands of hydraulic fluid.
Mixing different brands of hydraulic fluid can contaminate your system.
Call MTS if you’re not sure what brand of hydraulic fluid your system uses.
NOTE New fluid should be prefiltered since it may not be clean.
2. Open the filler cap. If you add fluid, add it 1 liter (1 quart) at a time.
3. Replace the cover cap.
4. Start the HPU.
Normal Level
No Fluid Visible
CAUTION