Manual

Overview
MTS Model 494.05 Handset
9
Exclusive Control Procedures: Quick Reference Guide
Manual Command
1. Press .
2. Press to select a
command signal.
3. Press to activate
Manual Command.
4. Use the thumbwheel to
position the actuator.
5. Press to exit
Manual Command.
*MC SN1 Ch 2
>Displ 130.5 mm
-Force 234 kN
Hydraulic Control
1. Press or to
display the Hydraulic
Control (HC) page.
2. Press to make the
current selection (-)
active (>).
*HC SN1 HSM1
T2=J28B
> Off
- Low
High
Interlock Reset/Override
1. Press .
2. The Reset/Override
timer appears.
*MC SN1 Ch 2
>Displ 130.5 mm
-Force 234 kN
* Reset/Override
Override: 100
-Reset
Auto Offset
1. Press to select a
signal (-).
2. Press to perform
Auto Offset.
*AO SN1 Ch 1
-Displ 130.5 mm
Force 234 kN
*AO SN1 Ch 1
-Displ _ 130.5 mm
Force 234 kN
*MC SN1 Ch 2
>Displ 130.5
-Force 234 kN
Strain 0.738 mm/m
To enter exclusive control:
Press (Exclusive Control).
To change display pages:
Press or to select
different display pages.
To select options:
Press (Scroll Down) to
move down the list of selections.
Press (Enter) to make the
current selection (-) active (>).