Manual

MTS Model 494.05 Handset
Handset Control Procedures
26
4. Press (Enter) to set the HSM to Low Pressure (HSM Low).
5. Press (Enter) again to set the HSM to High Pressure (HSM High).
How to Run Programs from the Handset
You can use the handset to run programs that are loaded on the station, such as
the MultiPurpose Testware (MPT) or Basic Testware applications.
1. Start the Station Manager application.
A. Load a station.
B. Select a handset.
C. Set the access level to Operator.
Note If you have configuration access, you can allow exclusive control at any
access level on the Handset Options tab.
2. Start a test application, such as MPT, and load a program.
3. On the handset, press (Exclusive Control).
4. Turn hydraulics ON.
(Optional) Use Manual Command to position the actuator for specimen
loading.
* HC SN1 HSM1 T2=J28B
Off
> Low
- High
*HC SN1 HSM1 T2=J28B
Off
- Low
> High