Owner's manual

Loosen the Manual Crosshead Locking Bolts
DescriptionItem
136 N·m (100 lbf·ft)1
271 N·m (200 lbf·ft)2
271 N·m (200 lbf·ft)3
Loosen the Manual Crosshead Locking Bolts
DescriptionItem
190 N·m (140 lbf·ft)1
3. Cycle the lock control to unclamp, and then reclamp, the crosshead.
4. Use the lock control to unclamp the crosshead. Wait 30 seconds for the pressure in the crosshead locks
to drop to zero.
5. Use the lift control to position the crosshead where you want it.
6. Use the lock control to clamp the crosshead to its current position. Wait 30 seconds for the locks to fully
clamp the columns.
MTS Landmark™ Tabletop Load Units Product Information 53
Installation