Owner's manual

DimensionsItem
5.1 mm (0.20 in)G
DepthH
Near Side: 25.4 mm (1.00 in)
Far Side: 20.3 mm (0.80 in)
63.5 mm (2.50 in)I
Series 662 Force Transducers
The force transducer commonly used with the axial-torsional tabletop Series 370 Load Unit is a Series 662
Force Transducer. There is no manual for the force transducer. The following table provides the specifications
for the force transducers.
SpecificationParameter
Axial-TorsionalCapacity
15 kN (150 N·m)Model 662.20HD-04
25 kN (250 N·m)Model 662.20H-05
15 V DCMaximum excitation input
350Ω Axial, 700Ω TorsionalBridge resistance
0.15% of full scaleHysteresis
0.3% of full-scale axial, 0.15% of full-scale torsionalNonlinearity
0.0036% of reading/°C (0.0020%/°F)Temperature
-46°C to 93°C (-50°F to 200°F)Usable range
21°C to 77°C (70°F to 170°F)Compensated range
1.5 mV/V at full-scale load (662.20-04)Output
2 mV/V at full-scale load (662.20-05)
Thread SizeAxial-Torsional Load
Capacity
Axial Load CapacityModel
M8 x 1.25 mm150 N·m15 kN662.20H-04
M10 x 1.50 mm250 N· m25 kN662.20H-05
36 MTS Landmark™ Tabletop Load Units Product Information
Introduction