Instruction Manual

Routine Maintenance Overview Checklist
Recommended service to be performed at each running time interval noted
AnnuallyBiweeklyWeeklyDailyCalendar Time using 8 hour Running
Time Rate Per Day
2,0001,500100050080408Running Time-Hours
X
4
Ensure the actuator platen area is clean.
XCheck all filter indicators.
XEnsure all hose, cables, and connectors are
attached properly.
XEnsure that the crosshead, lifts, and
supports are in working order.
XEnsure that the actuator is dry.
XEnsure that the hydraulic service manifold
is in working order.
XEnsure that the lift seal connection is dry.
XEnsure that the lock seal condition is dry.
XLubricate the axial/torsional spline. (Bionix
frame at 75-100 hrs)
XEnsure that the actuator is in working order.
XInspect all labels to ensure they are
attached and legible.
Crosshead/Load Frame
MTSMTSMTSMTSMTS
5
Ensure that the crosshead, lifts, and
supports are in working order.
MTSMTSMTSMTSMTSEnsure that the lift seal condition is dry.
MTSMTSMTSMTSMTSEnsure that the lock seal condition is dry.
4
Symbol denotes services performed by equipment operators. Most of these procedures involve visual checks
that should not interfere with test system operation. These checks are also completed by trained field service
engineers on each Routine Maintenance visit.
5
Symbol denotes service performed by trained field service engineers as part of an MTS Routine Maintenance
plan. Some of these procedures require special service tools and/or specific service training to complete.
76 MTS Landmark™ Floor Standing Load Units Product Information
Maintenance