Instruction Manual

Handset Controls and Indicators
DescriptionControl/IndicatorItem
Displays previous or next text in the display.Page1
Indicator. When lit, indicates the system is active (power applied).Active2
Scrolls the highlighted selection down. Selection cycles to the top
when the bottom line is highlighted and the switch is pressed.
Scroll Highlight3
Makes fine actuator adjustment (towards display – up; away from
display – down). Only if Handset Enable is active.
Thumb-Wheel4
Pauses the test action. This must be pressed again for the test
to resume. Only if the application test software is active.
Pause5
Stops the test action. Only if the application test software is active.
Stop6
70 MTS Landmark™ Floor Standing Load Units Product Information
Operation