Instruction Manual

Lock the Crosshead
DescriptionItem
190 N · m (140 lbf · ft)1
Lock the Crosshead
DescriptionItem
Hydraulically Locked Crossheads1
Manually Locked Crossheads2
Manual locks not available on Models 370.25 and 370.50.3
4. Before you move the load unit, check the following:
• The floor where the load unit will sit can bear its weight.
• The path to where the load unit will sit is clear and uncluttered.
• The area where the load unit will sit is clean and well lit, with all hoses and cables moved out of the
way.
5. Move the load unit slowly to its installation site.
Move the load unit only with slings or chains using an overhead lifting device. Lift the load unit only as
high as necessary.
44 MTS Landmark™ Floor Standing Load Units Product Information
Installation