Instruction Manual

g) Using the offset wrench, loosen (but do not remove) the self-locking nut.
Mechanical Null Adjustor Pin
DescriptionItem
Series 252.2X, 252.4X, and 252.5X Servovalves1
Series 252.3X Servovalve2
3/8 Inch3
3/32 Inch4
Base (end view)5
Base (side view)6
Self Locking Nut7
Scribe Mark on Adjuster Pin Pointing Toward Servovalve Base8
Adjustor Pin9
Adjustor Pin10
112 MTS Landmark™ Floor Standing Load Units Product Information
Maintenance