Service Manifold Model 293-12B Owner's manual

Warning:
Do not replace the filter with residual hydraulic pressure in the system.
Residual pressure can cause unexpected, high-pressure fluid discharge and actuator motion.
This can result in personal injury or death or damage to equipment.
Ensure that the HPU output pressure is zero before you begin the replacement procedure.
DescriptionItem
Vent Plug1
Bowl2
O-ring Seal3
Filter Element4
Filter Indicator5
Filter Head6
1. Turn the HPU off or remove hydraulic pressure from the hydraulic input of the HSM.
Series 293 Hydraulic Service Manifold Product Information | 47
Maintenance