Service Manifold Model 293-12B Owner's manual

Control Manifold Front View
DescriptionItem
Low Pressure Solenoid1
High Pressure Solenoid2
Hydrostatic Bearings Supplied Pressure3
Pressure4
Hydrostatic Bearings Controlled Pressure5
Return6
Pilot return7
Drain8
Pilot Pressure9
Depending on the model, the high/low solenoids may be powered by either 115 VAC or 24 VDC. The
following figure shows the pin assignments of each connector.
• The Model 293.22A contains 24 VDC control power. The 3-pin connector for the high/low solenoids is
shown below.
• The Model 293.22B contains 115 VAC control power. The 3-pin DIN connector for the high/low solenoids
is shown below.
Series 293 Hydraulic Service Manifold Product Information | 39
Installation