User Manual

Control Panel Identification
MTS Fundamental™ Pneumatic Grip Controller Product Manual
5
Control Panel Identification
Front Panel
1
2
3
5
4
ITEM CONTROL DESCRIPTION
1
Power/equipment indicator A continuously lit indicator indicates the pwoer is
OK; If the indicator keeps flashing, check the AC
power adapter.
2
Output air pressure (indicating
gage)
MTS Fundamental Pneumatic Grips can withstand a
maximum pressure of 0.7 MPa (100 psi).
3
Pressure control (knob) Use the appropriate minimum pressure to grip the
sample.
4
Upper clamp closure rate control
(knob)
When adjusting this control, ensure the closure rate is
not so high as to damage fragile samples.
5
Lower clamp closure rate control
(knob)
When adjusting this control, ensure the closure rate is
not so high as to damage fragile samples.