Manual

Operation of Temperature Controller
FGW900 High-temperature Furnace Product Manual Operation
30
J2 E-STOP pin assignments are as follows:
J4 pin assignments are as follows:
High temperature furnace heating wire N (OUTPUT N): the heating wire of high-
temperature furnace temperature controller N connects the plug-in components.
The socket connects the heating wire on the furnace of N-line side.
J5 pin assignments are as follows:
P
IN SIGNAL
1 ESTOPB_OUT-
2 No Contact
3 ESTOP_OUT_MONTION-
4 ESTOP_OUT_MONTION+
5 ESTOP3B+
6 ESTOPA_OUT-
7 ESTOP3B-
8 ESTOP3A+
9 ESTOPB_OUT+
10 No Contact
11 No Contact
12 No Contact
13 ESTOP3A-
14 ESTOP_OUT+
15 No Contact
PIN SIGNAL
1 Upper heating L
2 Middle heating L
3 Lower heating L
4 GND
5 No Contact
6 No Contact
PIN SIGNAL
1 No Contact
2 No Contact