Manual

Operation of Temperature Controller

FGW900 High-temperature Furnace Product Manual Operation

The interface use 9 pins connectors and three of them are used. Pin assignments

are as follows:

E-STOP: The J1 connector should be connected to either J14 of the Frame

Controller or J2 of another Accessory with an Emergency Stop board.

The J2 connector will either have a jumper plug or be connected to J1 of another

Accessory with an Emergency Stop board.

J1 E-STOP pin assignments are as follows:

IN SIGNAL

1 No Contact

2 COMM A(+)

3 COMM B(-)

4 Communication GND

5 No Contact

6 No Contact

7 No Contact

8 No Contact

9 No Contact

PIN SIGNAL

1 ESTOP3B-

2 No Contact

3 No Contact

4 ESTOP_OUT_MONTION+

5ESTOPB_IN+

6 ESTOP3A-

7ESTOPB_IN-

8ESTOPA_IN+

9 ESTOP3B+

10 ESTOP_OUT_MONTION-

11 No Contact

12 No Contact

13 ESTOPA_IN-

14 ESTOP3A+

15 No Contact