Owner manual

MTS Criterion Series 60 Systems Handset Description
DescriptionControl / Screen / LEDNumber
Shows the next four lines of text in the display.Page1
When illuminated, indicates the machine is active and can
move.
Active2
The F1 and F2 programmable function keys are designated
as digital inputs to which you can assign test functions. Test
F1 and F23
functions can include start test, pause test, hold positions,
and so forth.
Makes fine adjustment of upper crosshead and table. Moving
the wheel towards the display moves the upper crosshead
Thumb-Wheel4
and table up; moving the wheel away from the display moves
the upper crosshead and table down. The handset must be
enabled for the thumb-wheel to be active.
Pauses the test action. Press this button again for the test to
resume. Testing software must be active.
Pause5
Stops the test action. Testing software must be active.Stop6
RJ-45 connection to the controller.Connector7
MTS Criterion
™
Series 60 | 45
System Introduction