Manual

Location of Crosshead Limit Stops
DescriptionItem
Limit Rod1
Upper Limit Stop2
Lower Limit Stop3
Limit Switch Actuator4
Crosshead5
10. Install the specimen.
Caution:
Failure to properly use the grips to secure a specimen can result in an insufficiently gripped
specimen.
An insufficiently gripped specimen can cause specimen damage, equipment damage, and
the possibility of specimen fragmentation.
Before testing, ensure both grips are clamped and the specimen is secure.
Continue your test procedure using the TW software.
MTS Criterion
Series 40 | 123
Best Practices for Other System Configurations and Tests