Installation and Commissioning Plan Manual

Installation and Commissioning Plan
10 Criterion
TM
Series 60
INTRODUCTION
This Introduction provides a brief overview of the supplied equipment. It is not
intended as a substitute for formal training. MTS strongly recommends formal
classroom training at the MTS facility in hardware and software operation and
maintenance.
Note: The customer shall supply specimens to be used during the system
introduction. Typically, FSEs are trained in the operation and set-up of
MTS testing systems, but are not trained in the performance/procedure of
specific tests.
INTRODUCTION TOPICS:
B2.0 Review and Training
Item Description

Performed
On Site
B2.1 Loading test methods.

B2.2 Running tests

B2.3 Saving, naming, and exporting data.

B2.4 Printing reports.

B2.5 Backup and restoring data.

B2.6 Define function

- Make simple changes to the test flow.

- Configure inputs.

- Use the formula Builder to write simple results
formulas.
