Instruction Manual

MTS Criterion™ Series 60 Product Manual Maintenance

Maintenance

Routine Maintenance Overview Checklist

Recommended Service

CALENDAR TIME USING 8 HOUR RUNNING TIME RATE PER DAY DAILY WEEKLY ANNUALLY

RUNNING TIME-HOURS 8 40 2000

Shunt cal check

Clean work area/machine surface/jaw X

Verify limits and Emergency Stop X

Inspect cable/connections X

PC Maintenance

Back up testing software files (*.reg/.cal files)

MTS

†

Defragment hard drive MTS

System Inspection

Inspect/clean controller MTS

Inspect cable connections MTS

System Checks

Check Emergency Stop MTS

Check piston travel limit MTS

Check crosshead upper limit MTS

Check crosshead lower limit MTS

Check load cal/shunt cal MTS

Check lead screw nuts MTS

Lubrication

Cushion plates and wearable plates of the grip

(molybdenum disulfide grease)

MTS

Driven parts of lower crosshead (lubricating grease) MTS

Frame, Integrated Operations Platform and Work Area

Clean/replace air filter, suction filter, high-pressure line

filter

MTS