Owner's manual

MTS Criterion

Series 40 Product Manual

Installing Cables

Installation

J4 Encoder This connector is intended for encoder-based transducers. Specifics for this

connector are:

• Power: +5 V +/- 0.25 V at 100 mA max

• Signals: Quadrature A and B with index I

• Logic: Differential receivers (can connect single ended)

• Maximum Rate: 100,000 lines/sec = 400,000 counts/sec

Pin assignments are as follows:

IN SIGNAL

1 TEDS data

2 A+

3 A-

4 +5 V

5 I+

6 I-

7 Analog GND

8 B+

9 B-

10 TEDS ground

Criterion_product manual.book Page 72 Monday, July 28, 2014 3:52 PM